The FluidReg® (water) regulator is an independent membrane regulator that can be installed in every compressed air and fluid system. It supplies a constant, exact outlet pressure regardless of the input pressure. The pressure is factory-set and cannot be changed. This ensures that nobody can alter the specified pressure.
It is well known that the pressure of a water or fluid line normally is too high, fluctuates, and varies according to the height of the building. In that case the In-line FluidReg protects all equipment and components placed after it, because thus they will only receive the correct pressure. This is particularly important for all machinery/plants for or with dosing of liquids, for in this case expensive production stops can be avoided.
The standard FluidReg® is suitable for the media water, or compressed air. A modified version of the FluidReg® for medical application-such as oxygen, nitrous oxide N20 etc. is also available. Furthermore if the FluidReg is combined with a sprinkler nozzle, the best basis for cooling/cleaning by means of water spray or fog is created.
Coffee and soft drink machines
Laboratory dosing equipment
Irrigation systems etc.
Threads: 1/4 BSP FluidReg female/female
Length (mm): 52
Across flats (mm): 17
Weight (g): 125
Maximum inlet pressure (bar): water: 10; other gases: 18
Temperature range (°C): water: 4 to 60; other gases: 0 to 60
Housing: brass nickel plated
Other parts: nitril/FPM, stainless steel, PPH
Flow of water is measured at 10 bar in mm/min. Δp:0.8 bar.
Flow of gas is measured at 12 bar in l/min. Δp:0.5 bar.
|Outlet pres. (bar)||1.0|
|Water flow @ 10 bar (ml/min)||3,000|
|Gas flow @ 12 bar (l/min)||400|